I really like this pattern, so I am going to make more as Christmas 2016 gifts to family members.

I followed the same process as for Flower #1 with a few exceptions.......
-I bought the Morton Portable Glass shop to be able to easily and quickly
  cut rectangles to the same size. I used it for the 1st time on this project.
-I bought the little plastic extension table for using 1/4" diameter bits on the
  grinder. I also used it for the 1st time on this project.

Below are pictures taken as I built this project........

The Morton Portable Glass Shop being used to cut rectangles of same size:



The new plastic extension table on the grinder............



All the glass pieces cut out.........



All the pieces copper foiled...........



Soldered up............



I next attached the outside frame, soldered on 2 hanging rings, washed, and applied black patina to the solder.

The finished pane in the early morning sun...........



===============================================